Page 2 of 2 FirstFirst 1 2
Results 11 to 15 of 15

Thread: help with tuning

  1. #11
    Senior Member Four Point jdduffy's Avatar
    Join Date
    Nov 2007
    Location
    Rowley,MA
    Posts
    264

    Default

    Quote Originally Posted by buckndoe View Post
    I shoot right handed as well and that's what i can't figure out. when I line up the string and rest at brace my pins are clearly visible to the left which means when I draw and look through the peep my arrow is aiming to the right yet hits where my pins are aiming. How can I tell if it's a riser issue?
    if your bow has a cable rod or roller gaurd your pin should be to the left,it's because of the torque that they cause.the pins will only line up with a shoot through cable set up.

  2. #12
    Senior Member Forked Horn Buckwest1's Avatar
    Join Date
    May 2008
    Location
    Belgrade Montana
    Posts
    118

    Default

    Quote Originally Posted by TX Rattlesnake View Post
    Here is an explanaiton of Archer's Paradox.

    http://en.wikipedia.org/wiki/Archer's_paradox
    Thanks for the link TX but know I'm really confused. Does that mean that if my arrows are hitting to the left of where they are pointing out ot the bow that they are too stiff? Kevin?

  3. #13
    Respected Member Ten Point
    Join Date
    Dec 2007
    Location
    Missouri
    Posts
    1,284

    Default

    When I line up my string to the center of my rest my sight pins have always been to the left. I usually don't see any of the pin shaft just the fiber ends sticking out. It's always been this way on every bow I've ever shot. Someone else said it earlier that you may need a different sight that has more windage. I know the extreme sight from a couple years ago didn't have much adjustment. What sight are you shooting?
    Dan

  4. #14
    Member Spike Headhunter67's Avatar
    Join Date
    Jan 2008
    Location
    Front Royal, Virginia
    Posts
    79

    Thumbs up

    Just got around to sighting in my GT 500 today. I'm using a Spot Hogg sight and had to do some serious changes from the setup on my Synergy to get the GT shooting straight w/the sight. Once sighted in w/the 20 yard pin I was shooting 2" groups at 30 yards. Yes the pins were showing very much to the left of the string/arrow line but shooting like darts. I'll have to sight in the other four pins later to see if the grouping continues.
    '08.5 GT500 Ninja 29/60; Hogg it Hunter;
    X-weave arrows; CX F15 broadheads; MZE rest
    '07 Synergy 28.75/70

  5. #15

    Default

    I was having major problems with arrow hitting far left of target with my sight maxed out to the left. I'm embarrassed to say I was measuring wrong for center shot. Once I got rest at the real 7/8" I was able to actually move my sight to the right and am now walk back tuning great and also shooting paper bullets. For a while I was hung up on having string-rest-pin alignment which kept pushing everything (including brain) left. Talked to Old Buck as I was about to sell the bow. He expalined about cable guard bows and some other issues. Wish I knew about paradox a couple days ago. Thanks to all for helping.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •