2010 Judge with dls cams

[stumpshooter]

I was wondering if anyone has put dls cams on a judge. I just took some #3 cams off my 09 gt500 and was going to try them on the judge. I was wondering if there is any advantages to dls cams and what the draw length would be. They are 29" on the gt.

Thanks
Rich

[JHENS87]

might pick up a couple fps, #3 cams would be 28'' on a judge

[DJudge]

I've often wondered if anyone had switched to either the older DLS or any of the newer cams and compared changes in speed and draw for curve.

[bfoot]

I've often wondered if anyone had switched to either the older DLS or any of the newer cams and compared changes in speed and draw for curve.

I bought a Judge and put dls Rev cams on it but never shot it with the modular Revs. The draw is fine to me. The # of cam is different that other Rev cams. That is, I shoot 29" which is a #3 on all other dls Revs but on the Judge is a #1, Check the tune charts for the Judge and use the dls Rev that corresponds to the mod on the modular Revs. I am pretty sure the dls Revs are going to be faster. They are 10 fps faster for the GT500 and 16 fps faster for the Z28 compared to the modular Revs. Check the IBO on the tune chart and you can see for yourself the difference between the 2008 Z28 with dls and the 2010 with modular Revs. I like them and they shoot well for me.

[stumpshooter]

Thanks for the replies. We put them on last night and it shot pretty good. Not near as much valley though.