Help with a GT500

[Kevoswifey]

That is correct. Same cam just with a mod design. They are said to be 2-3fps slower, but probably not a deal breaker.

So, rev base cams are also out of stock. Got any ideas... Lol

[thinback]

Call customer service somtimes the on line store isn't up to date.

[Ray Ray]

http://www.archerytalk.com/vb/showthread.php?t=1721058 This may help

[Ray Ray]

http://www.archerytalk.com/vb/showthread.php?t=1787115 & this

[bfoot]

Well, you aren't going to like what I have to say too much. First the easy part. To hit 50lb max, you need a 220 deflection limb. The harder part is the DL. To hit 27" you will need a #7 cam, but you will need to get a new string as well as you are going from the short draw cuda cam to the standard cam. Strings and cables are different lengths for both.

I have a set of #7 Rev cams I would sell for $45. Pm me if interested. No limbs however. There are some 220s for sale on AT for $85. They are 215 def but the difference is negligible and they will work. Here is the link:

http://www.archerytalk.com/vb/showthread.php?t=1787115

bob

[Kevoswifey]

Thanks Bob, but I got the cams. Still looking for limbs. Will check out the post on AT.

[Ancient Archer]

If you'd like, I can email you a couple of Word documents that outlines how to tune a GT500. However, the most important tool you could make for yourself would be a draw board. A 100lb (min.) scale would be a necessity. Simpler & inexpensive.

[Kevoswifey]

I have a press and a draw board.

[wdriver]

If you can't find the limbs, you could probably go straight to Barnsdale and have him make you a set.
http://www.barnsdalearchery.com/contact.php

[Ancient Archer]

I have attempted to email the tuning documents to several of you. Unfortunately, some of your email addresses bounced. If you requested these tuning guides, but haven't received my response yo you, please contact me again with a valid email address and I will try again.