The head anyways no block
The head anyways no block
On my HHA, there is a series of holes that you can move the scope part up & down. I have always used the bottom holes, makes me wonder if any one really needs the higher holes. Most are useing the bottom or adding a drop extention.
Life should be measured by how many selfless acts of kindness someone does to positively influence somebody else's life.
Gt500,Bodoodle,Bstinger,
Easton fatboys, 28" DL, 53lbs
Gotcha, I'll fool w it try to make it work, wanna try slider but not 1/2 arse slider
I was having a problem with a HHA single pin dial sight in which I could just barely sight in at 60 yds. I couldn't go more than 60yds (when forced); it was maxed out. Back & forth with HHA CS couldn't resolve the problem. Ultimately I raised the rest & nock point (~1/8"). That resulted in the pinion gear at the mid-point of the rack. Can now easily go top 65yds while still dropping to ~10 yd.
Thoughts entering one's mind need not escape one's mouth!
As I age my memory fades .... and that's a load off my mind!
We Live In The Land Of The Free, Only Because Of The Brave
Hakuna Matata to all!!!
2010 Elite GT500: 50&60lb, HHA DS-5500, QAD UltraRest HD Pro Series, VForce HV 400
1965 Bear Kodiak Magnum 50lb, 52"
Posting Permissions
Reply With Quote