Tuning Issue...Sight or Bow?

[weis12]

I just bought an Elite Answer and set it up with a Limb driver Pro-V rest and Spot Hogg Real Deal. I shot it through paper and first shot was a bullet whole and was very happy. Then while trying to sight it in at 20yrds it shot way left and I actually ran out of adjustment on my sight to bring it to bulls eye. I'm am not sure if it is because the shelf on an Elite is bigger than a lot of bows that my sight is just not going to work for this bow or if something else is wrong? Does anyone have any ideas?

[cleggy]

Where do you have your centershot set? On my Answer; it's a touch less than 7/8". May need to move your rest in to achieve that. Arrow should be just a tad above center of the berger hole too. My Spot Hogg Hunter has a movable piece of metal on the sight bracket that I moved to the bow rest side to give me more adjustment too.

[2pin]

I am nowhere near as good as a tuner as some on here, but I just tuned my z28 today. What are u using your bow for? Mine is for pleasure shooting and hunting only so I never worried about paper tuning. I just bare shaft tuned at 20 yds and set pins out to 50 for now, very happy. I did have to set center shot twice due to trying a new rest then going back to original rest. Would say if just for hunting, bare shaft, broad head tune to get same poi, then lock it down. But if u are like me u always want/try to achieve better