I finally got a decent work area put together. It is nothing fancy but gets the job done. I had to redo my drawboard b/c of an issue or two. Now I think it will great.
The press is a bow-a-constrictor. (I highly recommend this press).
For the post on the drawboard I used a piece of steel pipe welded to a plate. The pipe comes up through the 2x6 and is bolted from underneath. The string measuring attachment folds down out of the way when not in use. It uses a 1/4" steel rod bolted on the same way as the other post. When I need to use it I grab the post I made and prop the 2x6 on top as seen in last pic.
Working good so far.