hi everyone I picked up my first elite bow last week....a GTO. It's my first binary cam bow and I have a few questions on tuning. I read everything on cam tuning and most of the info i find is on newer cams that actually have lots of individual timing marks. My cams actual have some wholes on them and they are lining up in the same place at full draw. My question is my brace height and A to A is off by 1/8 to 3/16". Should these specs be exact also? I read a few threads that said if the cams are timed the other specs aren't that important.

The draw stops are hitting the same and the are on the same draw stop timing marks and appear to be set according to the elite tuning guide. Can I advance these a little more to get more valley? I know this will affect draw length but if it grows slightly I should be ok.

The string a cables need to be replaced but I'm doing a little testing before I order new ones. If I can get everything sorted out and understand the process I will put the strings on my self. If not I'll have to drive 1.5 hours to the nearest dealer and let them do it.

Thanks in advance
Bill