2011 Elite Pulse No Valley or Letoff

[stkline81]

I recently changed my string on my Pulse & it seems like my bow has no valley & the let-off is almost nothing. Any suggestions as to what I need to do? My draw length seems like it might have shortened a hair, but not by much.

[elitej]

I'm sure you checked to make sure you got your draw stops in the right place???

[gamehog1]

How are you're measurements (ata,bh,poundage)? Have you put it on a draw board? Sounds like you're timing is off. I would guess that you would need to put a couple twists in your cables and maybe take a couple out of your string.

[stkline81]

Draw stops never moved. I just tried moving them both ways & it didn't make any difference that I felt.

[stkline81]

ATA is dead on. Brace height is about 1/8" or less over 6". No sure on the poundage - the limbs are 60-70 & I have them backed out exactly 1 & 1/2 turns.

[gamehog1]

I would put it on the draw board and look at your timing. I bet you are off just a little bit.(your timing not you haha.)

[archer58inPA]

After changing the string and/or cables you should re tune.
The string is probably not the same length as the one you took off.
If you don't have a draw board, take it to a shop that does.
It's the only way to properly re tune your bow.