So I finally got my new 123 limbs for the answer (old ones had pretty bad lines) and I got down to serious tuning. My 60x strings had the bow right on AtA and brace but draw was 1/4" long, max weight was 3# short and it peaked at almost 7 1/4".
As a side note, the stock strings weren't much better but I never messed with them since I was waiting on the new threads from 60X.
To make a long story short, I've got the bow now maxing at 65.5#, AtA is 33 5/16, brace 6 15/16", DL spot on @ 28.5 and it's peaking at just a tad over 6 1/2". Draw feels great holding weight is right around 11# and it's shooting lights out.
BUT....I had to twist and twist and twist to get it there and now my string and cables are really twisted up tight. I would think a new set of strings would be a lot closer but I talked to Brad and he said he built them to the specs from Elite's blueprints. I'm currently gathering parts to make a stretcher to check the lengths so I'll post up the numbers when I get it built.
Has anyone else had to twist things up this much?