Hunter string stop

[grunter53]

G'day Everyone,

I was sighting in my new Hunter the other day and felt a vibration on the shot. The string stop turned out to be the culprit and had worked loose. I know this has probably been asked many times, but what has everyone found to be the optimum string stop placement? Is it against the string or just off it? Any direction would be most appreciated.

Cheers

Grant

[Rgarbarino]

Leave a very slight gap, maybe 1/32. Use blue loctite on the set screws and they won't come loose.

[grunter53]

Thanks mate.

Will definitely get some loctite. I cursed the other day, my old bottle had dried up.

Cheers

Grant

[jgizzi]

That sounds right a credit card thickness some people cut piece of bowjax and place it inside the stop to make up the distance for extra silence

[Done Right]

Replace the set screws in the stop with 10/24x3/16 and you will be able to get them tighter with out stripping the heads out the replcement set screw are deeper and it will solve all your problems.

[Rgarbarino]

Replace the set screws in the stop with 10/24x3/16 and you will be able to get them tighter with out stripping the heads out the replcement set screw are deeper and it will solve all your problems.

+1 I did that on my Pulse and my Z-28 too.

[jgizzi]

Do u have to re-tap it

[jgizzi]

Done right you going to sportsman's show in Feb

[grunter53]

Thank you very much for the info guys. Most appreciated.

Cheers

grant

[Done Right]

Do u have to re-tap it

No you dont same size as stock ones just deeper for the Allen wrench wont strip out.the 3/16 gives you more depth