trophy ridge revolution on 08.5 z28

[85mustangman]

does anyone know if there is any clearance/adjustments with this rest. I have a ripchord and like it but i dont like the click it makes at full draw and i dont like how it releases when the bow is let down. The revolution looks neat and has great reviews especially in the noise factor

[Pulse76]

I was curious about that rest myself, but no one I talked to had any experience with it. I ended up going with the QAD HDx. The QAD does not drop during a slow letdown and also has a thumbwheel that makes it easier to cock. I'm interested to see what others say about the Trophy Ridge Revolution....it looks like a great idea.

[eagle-357]

I have one on my Hunter.

I like it, but I'm thinking about going back to a Wisker Biscut.

[bigoleboy]

I have a trophy ridge rev on my 09-Z 28. Works fine. I have the Micro adjust. $20 more but worth it.
Much better than the QAD I think. Code red works fine too. Have one on my Hoyt.

[85mustangman]

Well I picked one up with micro tune yesterday. Now do you level the adjust the level with the rest fully cocked. I leveled it how the instructions say but when at full draw the rest dicks up n the arrow is raised higher

[bigoleboy]

I put a little up presure on the rest with my thumb, once the arrow is in the rest and cocked, to see where the height of the arrow would be at full draw off the shelf and also check the center shot of the arrow and adjust to the specs of the bow. Worked oK once done. You may have to make small adjustments from there when tuning. There are others that no more about this than I do but that is how I did it.

[85mustangman]

Well I set up the rest according to the instructions and YouTube and the fletches hit the rest the first 2 shots and the third the bottom of the rest blew off I wouldn't think that the bow was to fast for it but Idk. It seemed to function fine just too slow

[eagle-357]

Well I set up the rest according to the instructions and YouTube and the fletches hit the rest the first 2 shots and the third the bottom of the rest blew off I wouldn't think that the bow was to fast for it but Idk. It seemed to function fine just too slow

Something is wrong there, there is no way that that should have happened.

Get ahold of Trophy Ridge Customer Service and see what they can do for you.