Results 1 to 3 of 3

Thread: string and cable don't match in manual, on bow sticker, or web site

  1. #1
    Junior Member Fawn
    Join Date
    Jul 2009
    Location
    Lakewood, WA
    Posts
    1

    Default string and cable don't match in manual, on bow sticker, or web site

    I have an 09 Z28 and the sticker on the bow and the manual that came with the bow have the cable listed at 37 1/4" and the string at 56 3/8". The web site says they are, cable 36 7/8" and the string 56 1/4" (not the same) The string and cable on the bow match the web site and not the manual or sticker on the bow. Not sure which measurements I should be using. I am not sure if I have the right string and cable on the bow now or not. The bow was suppose to be a 60# bow but came from Elite at 68 lbs now. When I called Elite I was told they may have put the wrong limbs on (70 lbs) Now I am not sure Elite put the right string and cable on or which measurements I should go with.

  2. #2
    Respected Member Ten Point Stag Scablands's Avatar
    Join Date
    Nov 2007
    Location
    Wash. state
    Posts
    2,351

    Default

    37 1/4 and 56 3/8 are for the 08.5 bow with Rev cams

    36 7/8 and 56 1/4 are for the 09 Z cams
    Some people try to turn back their odometers. Not
    me, I want people to know "why" I look this way. I've
    traveled a long way and some of the roads weren't paved.

  3. #3
    Respected Member Ten Point
    Join Date
    Jul 2008
    Posts
    1,775

    Default

    Scablands has it correct, 36 7/8 and 56 1/4 are for the 09 Z cams. I also have a 2009 Z that had the limb sticker with 2008.5 specs and a manual for the 2008.5 Z.

    If you ever order new strings make sure to give them the specs for the 2009 Z, I have had a string builder build a set to the wrong spec because they also has incorrect info.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •