Sight and CS issues, Help!

[eweese18]

Ok so I was trying to arrow tune my new 06 E-500. Ive got the LD on it set at 7/8, maybe a hair over closer to 15/16ths possibly. Problem is, my sight is still way left of the CS of my arrow when looking at it from above. The only way I get the arrow to hit where I want it to with the sight, is to have the sight further left than my rest. Whats the fix, do I need to move my rest over to the left a little more?

[Don Beaver]

It's totally normal to have your sight pins a little outside of the arrow path. I wouldn't worry about it unless it's really excessive.

[Maybee-R]

It's totally normal to have your sight pins a little outside of the arrow path. I wouldn't worry about it unless it's really excessive.

I agree with Don. You can use a tilttamer some find it helping with the alignment. Ive always had a straight line with mine and some of its from my low anchor. (Nock being closer to my line if sight)
My son had what looked like a 1/4 inch left of alignment. He is copying my anchor now and has a better line with his Pure.
Ive noticed the farther right or away from your face the release is the more left the pins end up.

[eweese18]

I will try to get a pic of it this weekend to see how excessive it is. Im only worried about it because when I put on my BH's the arrows start to hit further left and that would mean I need to move my sight even more to the left!

[bearfoot]

dont move your sight to the left move your rest to the right untill fp and bh hit the same due to torque built in to every bow that has a reflex riser they will be slightly left of arrow to string and opposite for people that stand on the wrong side of everything JK!!!!

[eweese18]

I tried moving the rest to the right. Ended up with my arrow hitting right, so I guess I needed to move my sight back to the right?

[Don Beaver]

I tried moving the rest to the right. Ended up with my arrow hitting right, so I guess I needed to move my sight back to the right?

You want to shoot field tips and broadheads moving your rest away from the broadhead tipped groups until they both group together. Then move your sight to match.

[TEXAS 10PT]

Everyone of my E-500's CS at 13/16". Its common to have your pin left of the arrow due to bow torque from the cable guard. Tilt Tamer would bring it back even if that's the way you want to go.

TEXAS

[wassaw]

quit using your Dads drawboard and press.....



and DON'T TOUCH JUDY'S BOW!!!!!


Hi!

[TEXAS 10PT]

quit using your Dads drawboard and press.....



and DON'T TOUCH JUDY'S BOW!!!!!


Hi!

Erich's actually trying his hand at the press tomorrow

TEXAS