I keep seeing threads pop up with crazy letoff numbers for the rev cam bows and I'm curious how you guys are achieving such high numbers. I'm holding about 18 lbs on a 2009 GT500 thats maxed at 72.2 pounds. DL is 1/4" long @ 29 1/4 and A2A is 34 5/8. I played with it for a few hours today and was able to get the holding weight down around 15 pounds but DL and DW were both running hot. Is there any way to get the DLS revs to 80% (or more) without running way long on draw? Or is this only achievable with the modular cams?


Reply With Quote
