Lost my wall

[K8hunter]

I recently changed my DL from 28.5 to 28 on my 07 Synergy. I moved the draw stop to what I think is around 5.5, but the wall is no where near like it used to be. How do you measure where to put the stop? Is it the middle of the peg or the outside of it? Also, the draw stop indicator has a 0 on it; does that mean the first line is zero or 1? Is it alright to switch which cam the draw stop is on? Help!

[Maybee-R]

My guess would be your draw legs are hitting the cables and not allowing the draw post to touch the limb. does it feel spongy?
And I have never tested a draw post on the bottom cam.

[trophytaker75]

The draw stop needs to stay on the top cam and yes the first mark is 1.The center of the peg should be on the corresponding #.To set the draw stop the best way is to put in place and make sure the drawstop touches the limb and compresses o-ring before the overdraw preventers just barely touch cables at full draw.This wil give you maximum let-off and the solid backwall providing your cams are insinc and timed correctly.

[K8hunter]

I will try and bring it to the bow shop and see where the stop is hitting so I can get it in the right position.

[NJBuckBuster]

K8 do u have access to a drawboard?? If so than u can check them yourself.. Maybe post some pics for us to help you out..

[K8hunter]

Unfortunately, I do not have access to one. I can post some pics of the current draw stop position