Arrows for Hunter

[FatboyStew]

Ok, I sold my Reezen and have decided to go with the Hunter.

I would like to use my Victory HV V1 350s for the Hunter. They are cut at 27.75 inches and I use CX lazereye nocks, which weigh about 18 grains, and vanetech HP vanes. The finished arrows, with point, weigh 330 grains, so I would set the bow at 66 lbs.

Do you think the spine will be right? I typically use a program to look at what arrows I will need, but the 11s aren't loaded yet.

Thanks,

Stew

[eagle-357]

Those should be fine for you.