GTO timing

[Metrodix]

By chance I got a 2008 GTO.
I did a search here at EAF but did not find
a clear instruction, how to tune and time
the GTO cams.
I dont see any timing marks on those cams.
Press and draw board is here!

So, how to time the GTO cams correctly?
Any pics and/or instructions??

[kiser]

At full draw the cables should just rest against the stops on the mods. Twist the cables to get the cams in the right position (advanced or retarded)...All the binarys tune the same. Those cams just don't have tuning marks.

[Maybee-R]

At rest for cam orientation I reverence off the cable post Make sure its not against the string.
Then time like Kiser said same as the Rev cams except you go from the over draw legs on the mods. allow enough room for compression of the O ring on the draw post. when you gap the cable from the legs.

[gepetto]

Ich hab hier: http://www.elitearchery.com/forums/s...ad.php?t=22653 schon mal gefragt!

[Metrodix]

Thanks guys, that was, what I was looking for!!

Gepetto, keine Panik, alles wird gut!