E500 questions

[rocket80]

I snagged a e500 a few days ago and had a few questions. I have a set of number 5EZ mods to go on it and was wondering about the draw stop position. The other is on the draw cycle. From what I can gather from Dans photo of the cams and what was posted it has the original cams. It draws real nice till the last inch or so and it seems like it loads up a ton. I didnt know if that is how they draw or what.
Thanks

[rocket80]

Been messing with and got the draw stop on the fifth mark down and that seems to work pretty good. The draw got way better and now seems to draw back real smooth. It almost feels like it draws straight back with little valley.

[Scablands]

Draw stop setting for the # 5 mod is 5.7 as a starting point. Move the draw stop back slightly, [.010 at a time] and it should give more valley and let off. The module stops should not be pressing into the cables, probably what gave you the rapid rise in weight at the end of the draw cycle. A little movement can make a big difference so go slow. It is possible to over draw and have the stops slip passed and lock the cams if you go too far. If you have a draw board do the settings on it so your movements can be precise and you can make sure the cams are in time as well.