How far does your arrow go past your rest ??
Arrow length past rest
How far does your arrow go past your rest ??
Mine is right at the riser so the fieldpoint or broadhead sticks out past my hand.
Do you lose a lot of speed if your 3in. past your rest?
longer it is the more it weighs the slower it goes.. but you don't want it to short cause that will cause other issues
1/4" to 1/2" for target... 1" for hunting.
1" past limbdriver launch for both 3d and hunting on my setup.
06 Energy
Have to again with Logjamb. I keep mine about an inch past the rest on all of my setups.
reply
mine is a half inch past the rest just far enough it dont hit my restOriginally Posted by mex
2007 Synergy
72#s 29.5 DL
firstcut mech
Mine is even with the riser.
Hunting shafts I like about an inch out in front. 3/d as close to the rest as I can safely cut them. spine makes a difference on length also.
No ifs and or buts Just maybee.
Posting Permissions
Reply With Quote