Revolution Cam Question

[tstamm]

First post and a question. I understand the Rev cams are draw length specific. With that in mind, how does one go about identifying the DL of a particular cam vs which model bow it's on? In other words is a 30" DL GT500 cam the same as a 30" XLR cam? I suspect not since the brace height is different for these two bows. Are there number designations on the cams......if so what is the shortest and longest (identification #'s) cams available? If one were to need another set of cams what is the aproximate cost? Thanks for the help.

[Maybee-R]

Its really easy to follow. the no#1 is max and on the GT and the Z its 30 inch. On the XLR it would be 32 inch DL. they go down in half inch increments from there.

[QuickRick]

If number 1 is max on a GT500 that would be 30"? I got a #3 on my cam does that make it 28 inches? I thought it was 29.

[Scablands]

If number 1 is max on a GT500 that would be 30"? I got a #3 on my cam does that make it 28 inches? I thought it was 29.

"they go down in half inch increments from there"

Yes the #3 would be 29" on a GT 500.

[tstamm]

OK got it.......any idea on the cost of replacement cams? thanks