Search:

Thank you.

Sent from my MB886 using Tapatalk 2

Just picked up an Elite Pulse, can anyone give me any information tips or opinions? Also how can I tell the difference between a 2011 and a 2012 model.
Sent from my MB886 using Tapatalk 2

I am looking for 28.5 mods for my Z28 or 28.5 DLS cams. I will either buy or trade my 29 in or 29.5 in mods.

This is the longest brace height I've had on a bow in years. Usually shoot 7 in or less. Shortest was my Axe 6 and 82nd airborne. Mostly owned Hoyt bows other than the 2 mentioned


Sent from my...

Cody


Sent from my iPhone using Tapatalk

Synced the cams properly, worked out some cam lean on the bottom cam. Checked the axles, put some wax between the modules and cams and a little bit of loctite on the module screws then paper tuned...

They took there time and did a great job. They do not have a draw board but my bow is shooting bullet holes through paper, is quiet as a church mouse and is dead in hand again. Also it is grouping...

From what I've seen it has just been 2010 models.


Sent from my iPhone using Tapatalk

Taking it to Buckeye Outdoors for what they call a super tune tomorrow. I will let you guys know how it goes.


Sent from my iPhone using Tapatalk

Someone mentioned putting some wax in between the cam and mod? I may just spend 60$ and order dls rev cams


Sent from my iPhone using Tapatalk

This was supposed to be a new in box bow. If the cams are bent I will buy some dls rev cams for 60$ which I prefer anyway


Sent from my iPhone using Tapatalk

I am taking it to a Elite dealer tomorrow to be super tuned as they call it.


Sent from my iPhone using Tapatalk

Also all bolts on the bow are tight. I went over everything this morning.


Sent from my iPhone using Tapatalk

I am using a NAP Apache rest. There is no contact with the shelf. The draw stops are hitting at the same time and the cables are both on the 3rd dot on the cam.


Sent from my iPhone using Tapatalk

Ok, with a 29 in draw what dot on the cams should I be hitting?


Sent from my iPhone using Tapatalk

It has limb savers on it. I will buy some dampeners today and see what that does


Sent from my iPhone using Tapatalk

The mod screws are tight. My question is though what dots on the cams do you want your cables to line up with? Right now they are hitting the 3rd dot.


Sent from my iPhone using Tapatalk

Thank you. I live in South Eastern Ohio. From the 330 area code I assume this guy is North of me a good ways. I am gonna give Hume a call later.


Sent from my iPhone using Tapatalk

I will say this though. I will be buying another Elite and I will be making the 3 hour drive to the dealership. Don't know whether to buy an Answer now or wait to see what they put out for 2013?

...

I need some advice folks. I recently changed some things up on my bow and it's pretty noisy now and has a lot of vibration at the shot. I switched modules from a 29.5 to a 29 in draw. Made sure the...

No you just need to verify the serial number before purchase with Elite. I really wish I had an Elite dealer around me that was under a 3 hour drive. That's why I bought my bow off of eBay. The guy...

I have a 2010 Z28 with about 500 shots through it. I swapped modules today and synced the cams and now I am getting noise and a lot of hand shock on the shot that wasn't there before. I switched from...

I bought a Z28 off of the guy and the only issue I had was the draw length was a little long. He sent me out the right modules and it's shooting great. I just have to have it retuned. Put about 500...

The Z is my first Elite. I have always been a Hoyt guy. I wanted to try one so I bought the Z. I like it so much I sold my Hoyts


Sent from my iPhone using Tapatalk

I haven't had an issue with my z28 that I bought. Maybe I'm just lucky. The only complaint I have was in the shipping. The guy didn't ship priority mail.


Sent from my iPhone using Tapatalk