Answer tuning

[Throw-N-Sticks]

My answer had to have new strings from where the cam chewed thru the serving. Got the string installed and I'm working to get the draw(feel) and draw length right. I was twisting and untwisting for an hour last night.... I got everything back pretty close to how it felt with the original strings, but the draw feels long. I do not have a draw board, but my ata and brace height are on. What do I need to do to reduce the draw length and keep the other things close to where thy are?

Thanks!

[archer58inPA]

Put a couple twists in the string. 2 at a time I'd say.
Don't worry about ATA or BH so much.
you will be reducing DW by doing this, so be conservative if your close limb weight.

[Throw-N-Sticks]

Ok thank you!