View Full Version : limb pocket spacers?
12-15-2009, 05:40 PM
So this might be a dumb ? But are all of these spacers the same for all bows? I've always assumed they are the same it just seems that some models you can see more of the spacer between the pocket and limb but I've always thought that was due to the pocket design.
12-15-2009, 05:55 PM
They are not the same height on all bows. I know the '09 Z takes the tall (+) while the others I think take just the tall.
12-15-2009, 06:17 PM
"rockers" "pivots""shims" different heights will cause a different poundage. if you bow uses small pivots and you put tall in it will increase by a few pounds on the draw weight.
same for the opposite
the 09 tech sheets tell you what spacer size but before that is not written, or at least know to the public i guess
12-15-2009, 06:30 PM
Yeah I know they will add poundage just like darton and their rockers, just always thought they were the same. I've not had an 09 apart yet so that isn't an issue. To your guys knowledge then are you suggesting all prior ones are the same? I've always used the ones that came on the pockets but have different limbs on numerous bows.
What has got me thinking is I have a clicking noise at the shot on one I put together the other day. Can't seem to find out where the noise is coming from.
12-15-2009, 06:40 PM
grease it, i had the same click and took the limbs off put grease on (just a little) stopped the clicking
that was straight from KS
Powered by vBulletin® Version 4.1.10 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.