Arrow length past rest

[mex]

How far does your arrow go past your rest ??

[fatboy95]

Mine is right at the riser so the fieldpoint or broadhead sticks out past my hand.

[mex]

Do you lose a lot of speed if your 3in. past your rest?

[fatboy95]

longer it is the more it weighs the slower it goes.. but you don't want it to short cause that will cause other issues

[hntwhitetail]

1/4" to 1/2" for target... 1" for hunting.

[Logjamb]

1" past limbdriver launch for both 3d and hunting on my setup.

[outbackarcher]

Have to again with Logjamb. I keep mine about an inch past the rest on all of my setups.

[bowman_79]

How far does your arrow go past your rest ??
mine is a half inch past the rest just far enough it dont hit my rest

[HONKER]

Mine is even with the riser.

[Maybee-R]

Hunting shafts I like about an inch out in front. 3/d as close to the rest as I can safely cut them. spine makes a difference on length also.

[Headofahessian]

i cut mine as close to the rest as possible!

[arrows01]

I cut mine approx. 1 in. past the rest, whatever the nearest 1/2 in. arrow length is. Just easier for me to remember my arrow length.

[Rattler]

spine makes a difference on length also.

Oh so true! with a 100gr point, a .400 Changes from .400 to .370 at 27.5" in length. ;)