Envy let-off question?????

[bponb]

How do you make the adjustments for how much let-off you want. Is it with the stop post and where you set it? I have a 28" draw length.

Thanks in advance

[Takeum]

At 28" draw,, set your draw stop at or around 5.3- 5.8 setting,, so between 5 1/2 and almost 6,,, the shorter you go,, the shorter your let-off,, The lomnger you go,, The larger your letoff,, Best of luck,,, Don't go past the 5.8 though if your looking for speed,, cause you'll actualy loose it at 70% and above,,

[lonehara]

Also make real sure with each adjustment that you don't go to far. Check your draw stops on your mods in relation to contact on the cable. If you go to far with the draw stop you can go overcenter and lock the bow up at full draw. NOT something you want to do.

[bponb]

Thanks guys. That is exactly what I needed to know. I knew both of you had the answer.

Just got this bad boy and can't wait to set it up and put it through the test.:homer:

[lonehara]

You are going to love it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Enjoy