View Full Version : Gto module questions
Hey everyone. :hail:
Can someone tell me if the draw weight will change if you change the draw length modules? If so, how much poundage will be gained if installing an inch longer module? :strong:
Thanks for any info!
01-17-2008, 07:19 PM
You don't gain poundage just one inch of power stroke = more speed.:hail:
I got my GTO tonight. I got it with 28" mods, but had 29's sent with it, and am going to try the 29's.
01-17-2008, 08:01 PM
Like scablands said, the poundage won't change.
This bow is sweet Kevin, almost sexy.......lol
01-17-2008, 08:17 PM
Draw weight is constant. Draw length = speed
Everything I've read says the stops on the modules should be 1/8" to 3/16" from the cables when the draw stop touches the limb. Does it hurt to let them just touch the cables? I kinda like the valley & let-off set like this. Is this a bad thing? This is on a GTO with 29" module. I don't want a full draw lock-up. :jaw:
01-20-2008, 07:09 PM
as long as they dont touch your fine. if they wear or fray the serving then they are to close. You wont lock it up with a 29inch mod.
Powered by vBulletin® Version 4.1.10 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.