Help With Gt-500

[RKMAST]

I was just wondering What you guys thought about the draw cycle of the GT-500. Ithink it draws really smooth. And ithas a really hard wall(because of the draw stops), but mine does not have much of a valley. Very short in the hole. If you creep a tiny bit it goes. It is shallower than my X-force. I have tried adjusting the draw stops, Ihave them as far is they will go, and it s still shallow. Is this normal, Thanks Ron.:(

[Daniel Boone]

I was just wondering What you guys thought about the draw cycle of the GT-500. Ithink it draws really smooth. And ithas a really hard wall(because of the draw stops), but mine does not have much of a valley. Very short in the hole. If you creep a tiny bit it goes. It is shallower than my X-force. I have tried adjusting the draw stops, Ihave them as far is they will go, and it s still shallow. Is this normal, Thanks Ron.:(

Contact Kevin_Elite here. Mine has a very good valley. Lot more than my XLR. I know just the little adjustment on the draw stops changes this.
Send pictures to kevin and see if he can help you.
DB

[RenegadeIndian]

Is this the whole hooblah of getting it on the 3rd dot on the cam??? Idont even know if that gives you a max valley on the bow or not.

[archer58inPA]

RK,
It sounds like you need to tune it. A GT500 should drop into the valley and hold well even if you creep some.
You may need to sync. the cams. Do you have a local dealer?
Do you have a press and a draw board?